Clean surface - Ensure that the surface where you plan to mount the Device is clean and dry. Use a cloth or cleaning solution to remove any dust, dirt, or grease to ensure the adhesive will bond properly.
Attach tape on wall - Apply the double-sided adhesive tape to the wall or surface where the device will be mounted. Press firmly to ensure the tape sticks securely. The tape acts as an initial guide for the placement and stability of the base plate.
Attach tape on base plate - Apply another piece of double-sided adhesive tape to the baes plate of the device. This will provide additional adhesion when the bae plate is attached to the wall.
Apply adhesive on tape - Apply a strong adhesive (epoxy works well) over the tape on the wall. The adhesive enhances the bond, ensuring the device remains securely mounted over time.
Attach and secure base plate on adhesive - Carefully position the base plate onto the adhesive on the wall. Press down firmly to ensure a strong bond between the base plate and the wall.
Attach Device on base plate - Secure the Vibration Device on the base plate and screw it in firmly.
Power the Device - The Vibration Device can be powered in several ways depending on your setup: Mains Power: Connect the device to an electrical outlet using the provided power adapter. Ensure the connection is secure. Battery only: Connect the external battery pack to the device, ensuring that all connections are secure. Solar and Battery: If using a solar panel, connect it to the device, positioning the panel North for optimal sunlight exposure.
Check the LED - Flip out the antenna. Observe the flashing LED light coming from the LED light from the centre of the SiteHive logo: 🟢 Power on and making comms connection, 🔵 power on and can't make comms connection.
