Hexanode Noise & Multi - Lead acid battery solar set up
Hexanode Noise & Multi - Lead acid battery solar set up
Steps
Lift Solar Panel - Lift the solar panel and tighten screws via 45° bracket
Connect bottom upright - Attach the bottom upright pole via the corner bracket to the base and attach 45° bracket to solar panel
Connect top upright - Connect the top upright pole via straight brackets
Connect Hexanode - Unscrew thread from the bottom of the Hexanode Device. Insert screw through the bottom of L bracket and into the Hexanode
Connect battery, solar panel and load to solar controller - Connect the battery cable to the solar controller and battery (ensure + goes to +, and - to -). Connect the solar cable to the solar controller (found behind the solar panel.) Connect the load cable to solar controller. Connect the load cable to the Hexanode Device (observe green light coming from the LED light from the centre of the SiteHive logo). Place the battery lid on and secure it with the battery strap.
Check Hexanode Device is on - Observe the flashing LED light coming from the LED light from the centre of the SiteHive Logo: 🟢 Power on and making comms connection, 🔵 Power on and can't make comms connection.
