Lift Solar Panel - Lift the solar panel and tighten screws via 45° bracket (for best solar, face panel North).
Attach cross stand piece - Take standalone cross piece and screw L bracket to it
Attach spikes - If the vibration device will be on soft ground (e.g. dirt), turnover vibration device and scew in spikes
Attach battery and battery cable - Screw lithium battery to either of the base pieces. Connect battery cable from under solar panel to the battery. The solar controller box will indicate which is the battery cable.
Connect Hexanode - Connect load cable (found under solar panel) to Vibration device. The white marker face up is the best guide for inserting.
Check Hexanode Vibration is on - Observe the flashing LED light coming from the LED light from the centre of the SiteHive Logo: 🟢 Power on and making comms connection, 🔵 Power on and can't make comms connection.
